[. . . ] It is recommended that a separate circuit serving only this appliance be provided. [. . . ] Drain System Options Standpipe drain system - wall or floor (views A & B) The standpipe drain requires a minimum diameter standpipe of 2" (50 mm). The top of the standpipe must be at least 30" (762 mm) high and no higher than 96" (2. 4 m) from the bottom of the washer. OVERALL DIMENSIONS Washer dimensions 521/2" (1335 mm) 27" (686 mm) Custom undercounter installation-washer only 39" min. (990 mm) 381/4" (970 mm) 1" (25 mm) 321/2" (820 mm) 27" (686 mm) 1" (25 mm) For closet installation, with a door, the minimum ventilation openings in the top and bottom of the door are required. See "Tools and Parts. " The siphon break must be a minimum of 28" (710 mm) from the bottom of the washer. Side view - closet or confined area For cabinet installation, with a door, the minimum ventilation openings in the top are required. 48 in. 2 * (310 cm2) 7" (178 mm) 3"* (76 mm) 7" (178 mm) 30" min. (710 mm) 9" (229 mm) C D 24 in. 2 * (155 cm2) 3"* (76 mm) 1"* (25 mm) 6"* (152 mm) 4" (102 mm) 311/2" (800 mm) 1" (25 mm) 27" (686 mm) 1" (25 mm) 76" (1930 mm) * Required spacing ** For venting out the side, 1" (25 mm) spacing is allowed. 5½"** (140 mm) 1" (25 mm) 27" (686 mm) 1" (25 mm) Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. [. . . ] (710 mm) 9" (229 mm) C D 24 in. 2 * (155 cm2) 3"* (76 mm) 1"* (25 mm) 6"* (152 mm) 4" (102 mm) 311/2" (800 mm) 1" (25 mm) 27" (686 mm) 1" (25 mm) 76" (1930 mm) * Required spacing ** For venting out the side, 1" (25 mm) spacing is allowed. 5½"** (140 mm) 1" (25 mm) 27" (686 mm) 1" (25 mm) Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. [. . . ]